HomeMy WebLinkAboutCAG2001-0432 - Original - Osmose, Inc. - Transmission Pole Inspection & Treatment - 08/27/2001 Records M ern
Doc
ument
ument
CONTRACT COVER SHEET
This is to be completed by the Contract Manager prior to submission to City Clerks Office. All
portions are to be completed, if you have questions, please contact Mary Simmons, City
Clerks Office.
Vendor Name: Ind-
Contract Number:
This is assigned by Mary Simmons
Vendor Number: .3—7'716
Project Name: / Sd/Ll�SS/d77 �n� Z/ZWG7%o�I 772��,�
Contract Effective Date:
Contract Termination Date:
i T
Contract Renewal Notice (Days):
Number of days required notice for termination or renewal or amendment
Contract Manager: _ ,Df9,61 AA0PI-7
Department: PeZ1 4-< �i�h/�l/�2i C�- y��gor�P�f
Abst act:
ord on
ADCL7832 07/02
r '-
CITY OF KENT
AGREEMENT WITH OSMOSE INC. FOR
TRANSMISSION POLE INSPECTION AND TREATMENT AT RUSSELL ROAD PARK,
KENT MEMORIAL PARK, AND RIVERBEND DRIVING RANGE
THIS AGREEMENT, is entered into between the City of Kent, a Washington Municipal
Corporation ("City"), and Osmose, Inc , registered and doing business in the State of
Arizona ("Contractor"), whose mailing address is 16421 N Tatum Boulevard, Suite 207,
Phoenix, Arizona 85032, Phone (602) 569-5632, FAX (602) 569-5633.
1 CONTRACTOR SERVICES. The Contractor shall perform the following services
for the City groundline inspection and treatment of ninety-nine (99) wood
transmission poles at three park locations (Russell Road Park, Kent Memorial Park,
and Rtverbend Driving Range) as further described in Exhibits "A" and "B"
(attached)
TIME OF COMPLETION. Contractor shall complete the work within forty-five (45)
working days from the date of issuance of the City's Notice to Proceed
2 COMPENSATION. The City shall pay the Contractor a sum not to exceed Nine
Thousand Nine Hundred, Twenty-Five Dollars and NO/100ths ($9,925 00), plus
applicable Washington State Sales Tax (8 8%) for the work and services
contemplated in this agreement.
3 RETAINAGE.
A No Performance Bond Pursuant to RCW 39 09.010, the Contractor has
elected to hold 50% retainage in city-managed bank account for a period of
sixty (60) days after the date of final acceptance or until receipt of all
necessary releases from the State Department of Revenue and the State
Department of Labor& Industries and until settlement of any liens filed under
Chapter 60 28 RCW, whichever is later
Contracts 1 of 3 08/20/01
Pole Inspection
Osmose, Inc
r
B Retainage The City shall hold back a retainage in the amount of five percent
(5%) of any and all progress payments made to Contractor for a period of
sixty (60) days after the date of final acceptance, or until receipt of all
necessary releases from the State Department of Revenue and the State
Department of Labor & Industries and until settlement of any liens filed under
Chapter 60 28 RCW, whichever is later
4. PREVAILING WAGES. Contractor shall file a "Statement of Intent to Pay Prevailing
Wages," with the State of Washington Department of Labor & Industries prior to
commencing the Contract work Contractor shall pay prevailing wages and comply
with Chapter 39 12 of the Revised Code of Washington, as well as any other
applicable prevailing wage rate provisions The latest prevailing wage rate revision
issued by the Department of Labor & Industries is attached
5 INDEMNIFICATION. Contractor shall defend, indemnify and hold the City, its
officer, officials, employees, agents and volunteers harmless from any and all
claims, injuries, damages, losses or suits including all legal costs and attorney fees,
arising out of or in connection with the performance of this agreement, except for
injuries and damages caused by the sole negligence of the City
The City's inspection or acceptance of any of Contractor's work when completed
shall not be grounds to avoid any of these covenants of indemnification-
Should a court of competent jurisdiction determine that this agreement is subject
to RCW 4 24 115, then, in the event of liability for damages arising out of bodily
injury to persons or damages to property caused by or resulting from the
concurrent negligence of the Contractor and the City, its officials, employees,
agents and volunteers, the Contractor's liability hereunder shall be only to the
extent of the Contractor's negligence
Contracts 2 of 3 08/20/01
Pole Inspection
Osrnose, Inc
IT IS FURTHER SPECIFICALLY AND EXPRESSLY UNDERSTOOD THAT
THIS INDEMNIFICATION CONSTITUTES THE CONSULTANT'S WAIVER OF
IMMUNITY UNDER INDUSTRIAL INSURANCE, TITLE 51 RCW, SOLELY FOR
THE PURPOSE OF THIS INDEMNIFICATION. THE PARTIES
ACKNOWLEDGE THAT THEY HAVE MUTUALLY NEGOTIATED THIS
WAIVER.
The provisions of this section shall survive the expiration or termination of this
agreement
6. INSURANCE. Before beginning work on the project described in this agreement,
the Contractor shall provide a Certificate of Insurance and a separate endorsement
naming the City as Additional Insured
" /V -iv- iS August 24, 2001
r—Jarftes H McGiffert Date
O mose, Inc
C 600 191 070 16-0579500
State License No Federal Tax ID No
)".'�' /& hk� - Q/
Jo odgson, bir for bat
nt Par , Recreation & Community Services
Contracts 3 of 3 08/20/01
Pole Inspection
Osmose, Inc
July 27, 2001
Shane Gilbertson
City of Kent
Parks Department
220 S 4'h Avenue
Kent, Washington 98032
RE Pole Inspection and Treatment
Dear Mr Gilbertson,
As requested by our District Manager, Dave Kosonen, Osmose, Inc is pleased to submit our firm
unit price proposal to City of Kent Parks Department (Owner) involving the groundline inspection and
treatment of approximately 99 Wood Transmission Poles
Our attached Exhibits"A"and "B" outline the technical specifications we are proposing, as well as
the inherent limitations of various inspection and treatment methods currently available to the utility
industry in which all pole owners should be aware
Mr Gilbertson, we are recommending a full, 360-degree eighteen-inch (18") deep excavation
type inspection, in conjunction with external OsmoPlastic treatment and MITC-Fume internal fumigant
treatment This is the most accurate inspection method available, insofar as being able to identify those
poles falling below NESC guidelines
Ron Polly, a in-place pole inspection and treatment professional, will supervise the work that will
be performed by an Inspector/Foreman specifically trained and experienced in this particular field
Environmental Protection Agency registered product labels and MSDS's of all proposed
treatments are enclosed for your files A copy of our Certificate of Insurance covering us for any potential
work on the Owner's system is enclosed
Thank you for allowing us to submit this proposal Please do not hesitate to contact our Area
Manager, Brian Smith (800-827-6844), our District Manager, Dave Kosonen (800-827-8891) or myself at
the Phoenix office should you have any questions All we would need to schedule a crew for this
important aspect of the Owner's preventative maintenance program would be the return of a fully
executed copy of the Agreement to our Phoenix address — -
Very Truly Yours,
James H McGiffert
Regional Vice President
Utilities Division
JHM/mwb
Enclosures
cc Buffalo
B Smith
D Kosonen
R Polly
Osmose, Inc
16421 N Tatum Blvd,Suite 207 •Phoenix,AZ 85032
602-569-5632• Fax 602-569-5633
rfI o,
City of Kent
Osmose Job Number: 0-51-175
Department of Forestry
Groundline with Fume
Price Schedule 1
Friday,July 27,2001
External Treat& MITC-FUME $125 00
Excavated Reject $110 00
Sound & Bore and MITC-FUME $90 00
Sound & Bore Reject $70 00
OSMOSE, INC. -
EXHIBIT "A"
Specifications For Inspection And Groundline Treatment
1. Above Ground Inspection
Visual inspection is to be made of upper portion of pole Defects observed
sufficient to warrant rejection shall be reported and no further work undertaken
2. Excavation And Inspection
Pole shall be excavated to a minimum depth of 18" below ground level The
diameter of the hole should be sufficient to provide approximately 4" clearance at the
bottom of the excavation A wire brush or check scraper is to be used to clean below
ground portion of pole to locate exterior decay
3. Sounding
Poles shall be sounded with a hammer from below groundlme to as high as an
Inspector can reach in order to locate exterior decay or interior pockets of decay
4. Boring
Inspector shall bore pole at least once to detect interior decay If rt is present,
pole shall be bored a sufficient number of times to determine location and extent of
decay Bored holes shall be filled with treated wood plugs or other suitable plugs
5. Chipping
All overhanging and loose weather wood is to be removed at least 6" above
groundline. Further, it is essential that all exterior decay be removed from the treating
zone No good or visually sound wood is to be removed from the stem of the pole
unless essential to inspection and/or treatment All loose shavings and decayed pieces
are to be removed from the hole and surrounding area
Exhibit "A"
6. Evaluation
Measure minimum circumference at or below groundline wherever the least
sound wood is present Make adjustments in circumference to account for external
decay pockets and internal decay in accordance with Osmose Pole Circumference
Calculator Check effective circumference against loading tables supplied or approved
by Owner (pole circumference calculator unless otherwise specified)
Poles below minimum circumference shall be rejected, and so marked in the
field and reported Poles with a minimum shell equal to or greater than 2 inches, with
the following exceptions
Poles 45 feet or greater in length shall have a minimum shell equal to or greater
than 3 inches, shall be treated; poles with a shell thickness less than the above
specified minimum shall be rejected Poles with a minimum shell of 2 inch(es) or
30% of original circumference or less shall be designated a "Danger Pole" or
other appropriate name
7. Evaluation For Reinforcement
Rejected poles shall be visually checked to determine if they can be reinforced
Poles with serious top defects or without sufficient wood at specific above ground
locations (see below) will be designated "Non-Reinforceable" and no further work
performed on the pole If minor above ground defects are observed, they should be
noted on the inspection report for Owner's attention
If after the above ground review all is in order, then all rejects will be sounded
above groundline and bored to determine extent of decay above groundline Inspector
shall bore the pole at 15" and 26" above groundline Sufficient borings shall be made
so all interior decay above ground is located to determine if the pole is a candidate for
reinforcing with a steel truss
Poles shall be selected by Owner for reinforcement from Contractor's pole
reports if there is sufficient shell thickness at specific locations on the pole - The type of
restoration method will be the determinant as far as location and minimum shell
thickness
In the case of Osmo-C-Truss technology, to transfer the strength of the steel to
the pole, the most critical location is at 15" or 26" above groundline If there is less than
2" average shell thickness at these locations and/or less than 4" average shell at 4 1/2
feet above groundline, the pole shall be designated "Non-Remforceable "
2
Exhibit "A"
FiberWrap restoration can potentially extend vertically to within the conductor
safe clearance zone so the Owner shall determine candidates with help of Contractor
However, minimum average shell thickness at the top of the repair shall be 4" on
distribution size poles and 5" on transmission poles
In all cases, rejected pole tops shall be visually checked to determine if they are
sound enough and within Owner's guidelines so that the pole can be reinforced
8. Internal Treatment For Decay and/or Insects
According to need, either of the following two preservatives can be used in poles
with voids However, if insects are present, HollowHeart will be used as it has shown to
be superior in effectiveness
A. HollowHeartR
A combination preservative and insecticide solution injected under approximately
60lbs per sq in pressure This material is to be used for application into interior
voids whenever such are encountered in quantity not to exceed 1 gallon
Concentrate active ingredients 10 90% sodium fluoride, 4 80% sodium
dichromate and 5 36% sodium arsenate
B. Copper Naphthenate
A liquid preservative solution containing copper naphthenate (2% copper as
metal) to be applied to poles with decay voids Application similar to item A
above
9. Fumigant
Either one of the two fumigants that follow are inserted in liquid or solid form, the
preservative then converting into vapors. Application is to be made into known or
suspected internal decay areas but not directly into a void where the vapor might
escape into the surrounding air through checks Fumigants will be applied in 7/8" holes
drilled 12" - 15" deep at a steep angle so as not to penetrate the opposite side of the
pole Tight fitting treated wood plugs are to be used to seal all holes.
A. MITC-Fumes
Active ingredient 97% Methylisothiocyanate Application to follow label
instructions No restrictions on application locations High effectiveness
3
Exhibit "A"
B. WoodFume
Active ingredient 32 7% Sodium Methyl Dithiocarbamate Application to follow
label instruction No restrictions on application locations Low to moderate
effectiveness
10. External (Preservative) Treatment
Preservative shall be the following
OsmoPlastic®
Ingredients
Sodium Fluoride 44 42%
Sodium Dichromate 3 20%
Creosote 45 62%
Inerts 6 76%
11. Wrapping
OsmoShieldT"' moisture barrier is to be applied over preservative, covering that
portion of the poles from 18" below ground to 4" above ground In locations where
livestock has access to a Treated Pole, a suitable cattle wrap shall be applied
12. Backfilling
Excavated holes shall be generously refilled and tamped, when possible, so as
to avoid possibility of subsequent settling leading to a depressed area
13. Clean-up
No debris, loose dirt„etc are to be left in pole area Private property turf,
bushes, etc , are to be replaced with care If any preservative is spilled on the ground,
it shall be immediately cleaned up All containers shall be disposed of according to
approved environmental practices
14. Identification of Work Completed
All inspected poles shall be marked with an aluminum tag (s) identifying work
performed, contractor and date in a fashion similar to the designations shown under
141 Tags shall be supplied by the contractor and placed seven (7) feet above
groundlme on the road side of the pole Tagging identification shall correspond to
reporting and billing categories ,
4
Exhibit "A"
14.1 Inspection and Treatment Tagging Scheme
Pole Inspected,Found To Be Above Strength Guidelines and Treated
Pole has been excavated to specified depth, 360 degrees, sounded,
bored and externally treated and fumigant treated(MITC-FUME® in this
" particular case — WoodFume® or TimberFume® would also apply
11,100'ri, ;t°= depending on specifications) in the year indicated The strength of the
rs^0* �...r„
v pole has been found to meet or exceed requirements although, however,
internal decay was detected in this particular case The internal decay
voids and/or insect nests have been flooded with Hollow Heart®or COP-
. R-NAPTm
we
Pole Inspected,Found To Be Above Strength Guidelines and Treated
Pole has been sounded and bored in the year indicated The strength
of the pole has been evaluated to meet or exceed requirements In this
particular case, the pole has been internally fumigant treated with MITC-
FUME® (depending on specifications, TlmberFume® or WoodFume®
r�
can be substituted)
h
01
I c, tl'4'
14 1 Tagging scheme-cont'd
5
Exhibit "A"
Poles That Are Reinforcing Candidates(Reject-Reinforce)
Yellow
Yellow or white rectangular tag signifies a pole that has been
,sounded bored (and excavated if necessary)
ary) and rejected This
particular pole has a yellow rectangular tag and is a candidate for pole
restoration using either the Osmo C-Truss''"' or FiberWrap methods
based on Section 7 Evaluation For Reinforcement
.,,t. ,
{R } Unless requested otherwise by Owner, these poles have all received
Hollow Heart® or COP-R-NAPTM internal treatment and a fumigant
pti treatment with WoodFume® The pole has been also externally treated
with OsmoPlastm®,if required
' yj rriw �r�`jv
�; , ;i Poles Recommended To Be Replaced (Reject-Replace)
This particular pole should be replaced due to insufficient groundlme
strength or pole top defects
One white rectangular tag signifies a reject - replace, two white
i, 4;xy.a'te Ali
,' vertically placed rectangular tags signify"Priority Pole" (or other Owner
''"r'd ; '
requested term) Since the pole is scheduled for replacement, no
treatments are normally applied
14
— n,
_k Fr kN3`l
'.I F
JF�! 1t
White
6
Osmose, -Inc.
EXHIBIT B
Additional Information Regarding Contractor's
Pole Inspection and Groundline Treatment Programs Relative to Best Practices
Pole Owners should be aware that the present art of inspecting poles and equipment and
the site where these items are typically located is not perfect, and there is no test
equipment or methods to make it so. When evaluating wood poles, there are variables
affecting wood quality for which the Contractor has no control These would include the
species of timber involved, the effectiveness or lack of original treatment, soil and climate
conditions, brash or brittle wood, including brash wood caused by soft rot which lacks
required strength, but is not always able to be detected by any known field methods, as
well as insect activity, bird damage or lightening damage occurring or resuming after the
time of inspection For these and similar reasons, perfection is not always possible, even
with highly trained professional inspectors and electronic instrumentation
When attempting to identify defective equipment in field conditions, there are also
additional variables over which a Contractor has little or no influence Trees and other
vegetation on utility right-of-ways continue to grow after the inspection date New
attachments and Imes are added to poles, and old equipment is removed by power,
telephone and cable television personnel and line construction contractors. Utility
subscribers and others can build, alter or demolish various structures, and roads and
driveways are added or rerouted, which violates clearance requirements and cable burial
depths without Pole Owners or inspectors being notified The longer time passes after
an inspection is performed, the less reliable the data on attachments, defective
equipment and clearances becomes.
Pole Owners acknowledge that the Contractor cannot in any way assume responsibility
for damage or injuries caused by factors or variables outside of the Contractor's control.
More specific information follows which should be known by utility management and
those who work on or near transmission, distribution and other outside plant facilities
1. Pole Inspection Methods
The primary groundlme inspection methods follow, along with observations based
on the experience of Osmose in regard to their reliability. Some or all apply to any
individual contract with the Owner's instructions prevailing. The Owner has
determined the frequency and type of inspection and application of supplemental
treatments and provides specifications on how to classify deteriorated poles
As a general rule, the more excavation that is done prior to inspection, the more
accurate the groundline inspection process can be
Rev 11100 Page 1 of 5
Osmose, Inc.
EXHIBIT B
Additional Information Regarding Contractor's
Pole Inspection and Groundline Treatment Programs Relative to Best Practices
When evaluating a damaged pole, the inspector approximates the size, extent and
nature of the damage and, with the aid of the Owner, reject criteria and measuring
devices, converts the loss of the pole's cross sectional area to an equivalent
reduced circumference sound wood This is not an exact science, and conclusions
about actual pole strength should not be based on effective circumference
estimates alone. The Owner needs to independently verify pole strength
a Visual Inspection from Ground Level -- This method is intended to locate
only readily visible gross defects, which can be seen with the naked eye
from ground level. Additionally, vegetation may obscure parts of the pole
Consequently, this inspection method provides minimum indication of
wood strength If used alone, this inspection provides little information to
help the Owner improve its pole plant It will miss most priority and reject
,poles If this is the only inspection method, it should be repeated several
times a year
b Sonic Inspection -- This method utilizes electronic sonic equipment, which
primarily measures speed of sound waves from one point on the outside of a
pole to another point on the opposite side of a pole in one narrow plane
Based on information gathered during follow-up inspections of many
thousands of poles in different geographic areas by the more thorough
excavation method described in "e" below, it is the experience of Osmose
that the sonic method is not as accurate as the Sound and Bore method
described next. Used in conjunction with visual inspection, historical data
shows approximately 40-50% of the reject and priority poles will be found
This inspection method should be repeated at least yearly,
C. Sound and Bore -- Without excavation, this method involves utilizing a
sounding hammer around the pole from ground level to about eight feet
above, followed by one or more bonngs at the groundline or other area
noted to be suspicious by sounding. It is specified by Pole Owners for poles
set in pavement where excavation is impractical. It can miss poles without
sufficient strength to meet NESC or other mandated overload capacity
requirements, and there is the possibility of missing those poles with
insufficient strength to support the current wire loading This is particularly
true when the decayed area is below ground level or if the inspector's tools
do not contact hidden, damaged areas Used in conjunction with -%isual,
inspection, historical data shows approximately 50 to 60 percent (50-60%)
Rev 11100 Page 2 of 5
Osmose, Inc.
EXHIBIT B
Additional Information Regarding Contractor's
Pole Inspection and Groundline Treatment Programs Relative to Best Practices
of reject and priority poles will be found. This inspection procedure should
be performed at least yearly.
d. Partial Excavation Plus Sound and Bore -- The primary options specified by
Owners in this category are
I) Pushing the soil away from the pole to a depth of four to six inches
at two or three locations prior to observing, sounding and making
one or more borings.
2) Removing soil to a depth of six inches at one or more points or
around the entire perimeter prior to observing, sounding and making
one or more borings
3) Excavating to a depth of 18 inches on one side of a pole prior to
observing sounding and making one or more borings.
The above partial excavation procedures can be expected to identify many
but not all inspected poles with decay below ground or other condition
causing a reduction in the required strength at the groundline Used in
conjunction with visual inspection, historical data shows that approximately
80 to 90 percent (80-90%) of reject and priority poles will be found. This
inspection procedure should be repeated every three to five years,
depending upon the decay hazard zone where the poles are located
Excavating around poles may lead to an important shortcoming, unless
supplemental treatments are specified by the Owner. The addition of air
and moisture to the new backfill may set up conditions more favorable to
decay than if no excavation had occurred. Therefore, a supplemental pole
treatment is recommended, otherwise, re-inspection cycles must be
shortened
If critical decay is found or suspected during any of the above three
procedures, excavation to at least 18 inches all the way around the pole is
highly recommended. The pole can then be judged more accurately and be
classified as sound and treated or recommended for replacement or strength
restoration.
Rev 11100 Page 3 of 5
Osmose, Inc.
EXHIBIT B
Additional Information Regarding Contractor's
Pole Inspection and Groundline Treatment Programs Relative to Best Practices
e. 18" to 24" Excavation Plus Sound and Bore Pius Supplemental Treatment -
This inspection procedure constitutes the most thorough method known
without using electronic instruments, but is nevertheless not perfect because
of the variables previously discussed and because obstructions such as rock,
adjacent buildings, sidewalks, keys, roots, risers, deep decay, underground
cables and other obstacles sometimes prevent "full" excavation and/or
treatment with respect to depth, circumference or both. Typically, once the
excavation is made to improve inspection accuracy, the procedure also
includes treatments Remedial preservatives help prolong life and avoid the
problems resulting from soil disturbance described above, otherwise re-
inspection cycles must be shortened. Used in conjunction with visual
inspection, historical data shows approximately 98 percent (98%) of reject
and priority poles will be found This inspection procedure should be
repeated eN en six to 10 years depending on the decay hazard zone where
the poles are located
2. Using Electronic Devices
All inspection methods may be augmented by the use of electronic devices if specified by
the Owner. The Shigometer" is one such device It measures the pole's relative
conductivity, which provides information on the presence of decay activity before the
wood shows signs of physical breakdown. Another instrument attempts to predict the
strength of individual poles based on the characteristics of sound waves. It does not
identify the cause of reduced pole strength such as the presence of decay. However, it
may provide an indication of low strength resulting from the inherent variability of new
pole strength All of these devices have limitations and will not detect all reject and
priority poles
3. Pole Treatment
The nature and extent of supplemental treatment work has been specified by the Pole
Owner. A certain number of poles treated will only just meet Pole Owner's specifications
for treatment rather than rejection. Most of these, after treatment, will provide some
satisfactory continuing service, but Owner should be aware that a small percentage of
poles will fall below strength requirements prior to the next inspection cycle. These poles
are in addition to the reject and priority poles not found during the inspection
Rev 11100 Page 4 of 5
Qa
�c .V11U. l.tK t il-It;ATE OF �� Pnmm
/Z4/2001
OOUCFA (716)505-2600 FAX (716)505-0375 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION
arran-Hoffman & Associates ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE
HOLDER.THIS CERTIFICATE DOES NOT AMEND,EXTEND OR
.70 Northpoi me Parkway ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW.
aherst, NY 14228-1884
INSURERS AFFORDING COVERAGE
suREG INSURER Zurich American Insurance Co.
Osmose, Inc. INSURERB. National Union Fire Ins Co of PA
980 Ellicott Street INSUHERc Zurich American Insurance Co.
Buffalo, NY 14209-2323 INaURER d.
NSURER e
3VERAGES
THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE PCLICY PERIOD INDICATED NOTWITHSTANDING
ANY REQUIREMENT,TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHK>i THIS CERTIFICATE MAY BE ISSUED OR
MAY PERTAIN,THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TER AS,EXCLUSIONS AND CONDITIONS OF SUCH
POLICIES AGGREGATE LEATS SHOWN MAY HAVE BEEN REDUCED BY PAID CLANS
TYPE OF INSURANCE POLICY HUMMER DATE(MMIDIXTY1 MR Z: 1N POLICY EFFECTIVE t=O�C
LIMITS
OENERAL LIABILITY L0844S511-04 01/01/2001 01/01/2002 EACH OCcunRENCE & 1,000,00C
X COMMERCIAL GENERAL LIABILITY FIRE DAMAOE(Any ane Um) $ 5(),000
CLAIMS MADE OOCCUR MEDEXP(Anyonepamn) & 5,000
PERSONALaAOVINJURY & 11300,000
GENERAL AODREGATE S 2,000.0m
OEML AGGREGATE LIMIT APPLIES PER PAWLICTS-DOMPJCPAGG S 2.000 000
POLICY PECT LOC
AUTOMOBILE LIABILITY P8445512-04 01/01/2001 01/01/2002 COMBINED SINGLE LIMIT
X ANY AUTO (Ea aeUdanq & 1 O00 000
ALL OWNED AUTOb BODILY INJURY
SCHEDULED AUTOS (Per pemeo) _
X H"2 DAUTOS
X NON-OWNED AUTOS (Px BmMILY NngY I
PROPERTY DAMAGE
(Per eeemenq
QARAOE LIABILITY AUTO ONLY-EA ACCIDENT $
ANY AUTO OTHER THAN EA ACC &
AUTO ONLY ACG i
EXCESS LIABILITY BF.3575095 01/01/2001 01/01/2002 EACH OCCURRENCE & 5.0001000(
X OCCUR OCLAIMS MADC AGOREOATE S S.Cloo.00
i &
OrDUCTIOLI_ S
X RETENT93N & 10,00
WORKERS COMPENSATION AND C8445510-04 01/01/2001 01/01/2002 X TORT LI TS ER
RMPLOYERS LIABILITY EL EACH ACCIDENT & 1,000.0
EL DISEASE-EA EMPLOYFI & 1,000,
E L DISEASE POLICY LIMIT & 1-1000,000
OTHER
:ACIPTON�T PERATI�10 IONVU10LOWEXI YurB; o E
Ie certCate nal Insuedper
NTISPacIAL TRWIEIO
Contract obligations of the insured and only as
T the liability accepted by the insured per said contract obligations
ERTIFICATE HOLDER X I ADORIONAL INSURED;INSURER Lmm A CANCELLATION
SHOULD ANY OF THE ABOVE CEDCRIBED POLICIES BE CANCELLED BEFORE THE
EXPIRATIONHE ile Mn TREOF,T ISSUINO COMPANY WNL ENDEAVOR TO MAIL
—v—DAYS WRITTEN NOTCJS TO THE CERTIFICATE HOLDER NAMPA TO THM LEFT,
City of Kent BUT FAILURE TO MAIL SUCH[NOTICE SHALL IMPOSE NO OBLIQA=N OR LIABILITY
220 S. 4th Avenue OP ANY WHO UPON THE COMPANY.ITS AGENTS OR NO I SeNTAT1VE3.
Kent, WA 98032 AUTHORIZEDRRPRE3MTATNE �- ', § - +►r
John Hoffman 7ELLCo
CORD 2d-B�7IB7) 4)ACORD CORPORATION 1888
WgRREtIsk14F.F,Mft4- &_ASS�Q_TEL Z465@5Q 5 — Rur afl lt _ t4 4.��La..:.Q2 =P 03
IMPORTANT
If the certificate holder is an ADDITIONAL INSURED, the poi{cy(ies)must be endorsed A statement
on this certificate does not confer rights to the certificate hct'4*r In lieu of such andorsement(s).
If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may
require an endorsement. A statement on this certificate does not confer rights to the certificate
holder in lieu of such endorsement(s)
DISCLNMER
The Certificate of Insurance on the reverse side of this form does not constitute a contract between
the issuing Insurer(s), authorized representative or producer, and the certificate holder, nor does it
affirmatively or negatively amend, extend or alter the coverage afforded by the policies listed thereon,
i
I
zas p�al'1
WARREN-I Aug -24'�_.�y-14 : 14
LIABILITY INSURANCE Z U RI C H
COVERAGE CHANGE ENDORSEMENT
Insurance for this coverage part provided by ZURICH AMERICAN INSURANCE COMPANY Policy Number: GLO 84455 1 1-04
Insured Name OS vOSE,INC Endorsement Number: E
This endorsement changes the policy,please read it carefully.
AUTOMATIC ADDITIONAL INSUREDS
COMMERCIAL GE!-ERAL LIABILITY COVERAGE PART
It is agreed that this policy is hereby amended as indicated All other terms and conditions of this policy remain unchanged.
The following provision is added to(Section II)Who Is An Insured (CG 00 01)
1 A. Any entity you are required in a written"insured contract"(heremafter called Additional Insured)to name as an
insured is an insured but only with respect to liability aristng out of your premises,"your work" for the additional
insured,or acis or omissions of the additional insured in connection with the general supervision of"your work"
to the extent as set forth below
(1) The limits of insurance provided on behalf of the additional Insured are not greater than those
required by such contract
(2) The coverage provided to the additional insured(s)is not greater than that customarily provided
by the policy forms specified in and required by the contract
(3) All imurutg agreements,exclusions and conditions of this policy apply.
(4) In no event shall the coverages or limits of insurance in this coverage form be increased by such
contract
B. Except when required otherwise by"insured contract', this insurance does not apply to:
(1) `Bodily Injury"or"Property Damage" occurring after-
(a) All work:on the project(other than service,maintenance or repai s)to be performed by or on behalf of the
additional insured(3)at the site of the covered operations has been completed,or
(b) That portion of"your work"out of which the injury or damage arises has been put to its intended use by any
person er organization other than another contractor or subcontractor engaged in performing operations for a
principal as a part of the same project.
(2) `Bodily Injury'or"Property Damage'arising out of any actor omission of the additional insured(s)or any of their
employees,other than the general supervision of work performed for the additional Insured(s) by you.
(3) "Property Damage"to,
(a) Property owned,used or occupied by or recited to the additional insured(s)
U-GL-113-B CW(04/89)
1RREN—HOFFMAN & RSSOC TEL , 7165050375 Rug 24_'01
LIABILITY Lr+iSlJRA3VCE
zURICH
COVERAGE CHANGE ENDORSEMENT
Insurance for this coverage part provided by: ZURICH AMERICAN INSURANCE COMPANY Policy Number GLO 8445511-04
Insured NI L= OSMOSE,INC. Endorsement Number: E
Thin endorsement changes the policy,please read it carefully,
Cb) Property in the care, custody or control of the additional insured(s)or property for which the additional
insured(s)is for any purpose exercising physical control;or
(c) `Your work"for the additional insured(s).
C Any coverage provided hereunder shall be excess over any other valid and collectible insurance available to the additional
insureds)whether primary,excess,contingent or on any other basis unless a contract specifically requires that this
msuraace be primary,or you request that it apply on a primary basis
U-GL-113-13 GW(0410)
r leas'
��� I� STATE OF WASHINGTON
_ — PxE DEPA�WALE UFFIOCE A3 OR-5335 1 FD(3 0 0-5300 -- --- -- -
POST OFFICE BOX 44540, OLYMPIA,WASHINGTON 985044540
August 1, 2001
TO Washington Public Agencies
FROM Jim Christensen, Industrial Statistician
SUBJECT Prevailing Wages
Attached are the prevailing wages you requested, effective for projects bid on or
after August 31. 2001 These wage rates MUST be physically attached to bid
specifications and contracts
Please visit our popular website at wv,v, Ini v a gov yievallingw-age
We are discontinuing the mailing of wages to all Washington public agencies each
February and August If you do not have Internet access, please send a note to the
address below and we will continue to send a hard copy to you. Otherwise, we
hope Washington public agencies will simply print prevailing wages from our
Internet site when they are needed Please remember that revised prevailing
wages are published on the first business day of February and the first business
day of August and that they become effective thirty days later Our address is-
Prevailing Wage Office --
Post Office Box 44540
Olympia, Washington 98504-4540
Every contractor and subcontractor on every public works project must file at
Statement of Intent to Pay Prevailing Wages and an Affidavit of Wages Paid
Both forms must be filed on every project The filing of the Affidavit of Wages
Paid does not set aside the requirement to also file the Statement of Intent to Pay -
Prevailing Wages. Please ensure that contractors file both forms. The department
may fine contractors $500 for failure to file these forms. Please review - - -
RCW 39.12 040 and RCW 39.12.042 if you do not understand your agency's
liability where both,forms were not filed. Those RCWs can be found on our
website listed above.
Stafe ofWaW1hgfnn =—
" DEPARTMENT[3FJKBORAIJDiNDtES�1?➢tS _-
-_-
Washington State Prevailing Wage Rates For Public Works Contracts
The PREVAILING WAGES listed here Include both the hourly wage rate and the hourly rate of fringe
benefits. On public works projects,workers'wage an3Ienefd rates must add to not less than this— -----
total A brief description of overtime calculation requirements is provided on the Benefit Code Key
KING COUNTY
Effective 08-31-01
■x:te■e+�,t:e.xx:��•x::�::�.:::.�r:<�+xx:�x�e�:t�:�texr:.:.::::t�:::.t.yes:��.:ext:::��������,t:r��«:tx:.f:::,t+::::.:::
(See Benefit Code Key)
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
ASBESTOS ABATEMENT WORKERS
JOURNEY LEVEL �' $29 67 1M 5D
BOILERMAKERS
JOURNEYLEVEL $3596 1B 5N
BRICK AND MARBLE MASONS
JOURNEY LEVEL $35 37 1M 5A
CABINET MAKERS(IN SHOP)
JOURNEYLEVEL $1171 1
CARPENTERS
ACOUSTICAL WORKER $3450 1M SO
BRIDGE, DOCK AND WARFCARPENTERS $3434 1M 5D -
CARPENTER $34 34 1M 5D
CREOSOTED MATERIAL $34 44 1M 5D
DRYWALL APPLICATOR $3494 iM 5D
FLOOR FINISHER $3447 1M 5D
FLOOR LAYER $3447 1M 5D
FLOOR SANDER $3447 1M 5D
MILLWRIGHT AND MAChINE ERECTORS $35 34 1M 5D
PILEDRIVERS, DRIVING PULLING, PLACING COLLARS AND WELDING $34 54 1M 5D
SAWFILER $3447 1M 5D
SHINGLER $3447 1M 5D
STATIONARY POWER SAW OPERATOR $3447 1M 5D
STATIONARY WOODWORKING TOOLS $3447 1M 5D
CEMENT MASONS - - — - - - - -
JOURNEYLEVEL - - $3533 -- 1M 5D - -
DIVERS 8 TENDERS - - -
DIVER $74 30 1M 5D 8A
DIVER TENDER $37 01 1M 5D
DREDGE WORKERS
ASSISTANT ENGINEER - - --- $3567 --- -------- 1B --- 3F}--- 81-
ASSISTANT MATE(DECKHAND) $35 23 1B 5D 8L
BOATMEN $3567 1B 5D 8L
ENGINEER WELDER $35 72 1B 50 8L
LEVERMAN,HYDRAULIC _ $37 11 1B 5D 8L
MAINTENANCE $3523 1B 5D 8L
MATES $3567 1B 50 8L
OILER $35 33 1B 50 8L
DRYWALL TAPERS
JOURNEY LEVEL $34 g2 11 5B
ELECTRICAL FIXTURE MAINTENANCE WORKERS
JOURNEY LEVEL $18 69 1
Page 1
-_
-- — - (See Benefit Code Key)
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
ELECTRICIANS-INSIDE
CABLE SPLICER $4457 1D 6H
CABLE SPLICER(TUNNEL) $61 22 1D 6H
CERTIFIED WELDER $4295 1D 6H
CERTIFIED WELDER(TUNNEL) $58 85 1D 6H
CONSTRUCTION STOCK PERSON $22 79 1D 6H
JOURNEYLEV=L $41 33 1D 6H
JOURNEY LEVEL(TUNNEL) $5647 1D 6H
ELECTRICIANS-MOTOR SHOP
CRAFTSMAN $15 37 2A 6C
JOURNEY LEVEL $14 69 2A 6C
ELECTRICIANS -POWERLINE CONSTRUCTION
CABLE SPLICER $42 16 4A 5A
CERTIFIED LINE WELDER $38 72 4A 5A
GROUNDPERSON $28 38 4A 5A
HEAD GROUNDPERSON $29 81 4A SA
HEAVY LINE EQUIPMENT OPERATOR $38 72 4A 5A
JACKHAMMER OPERATOR $29 81 4A 5A
JOURNEY LEVEL LINEPERSON $38 72 4A 5A
LINE EQUIPMENT OPERATOR $32 95 4A 5A
POLE SPRAYER $38 72 4A 5A
POWDERPERSON $2981 4A 5A
ELECTRONIC&TELECOMMUNICATION TECHNICIANS
JOURNEY LEVEL $12 07 1
ELEVATOR CONSTRUCTORS
CONSTRUCTOR $3129 4A 61
MECHANIC $42 25 4A 61
MECHANIC IN CHARGE $46 63 4A 61
PROBATIONARY CONSTRUCTOR $16 27 4A 61
FABRICATED PRECAST CONCRETE PRODUCTS
ARCHITECTURAL AND PRESTRESSED CONCRETE-All Classrfications $1060 1
ALL OTHER CONCRETE PRODUCTS-Carpenter $18 77 1B 6S
ALL OTHER CONCRETE PRODUCTS-Clean-up $17 99 1s 6S
ALL OTHER CONCRETE PRODUCTS-Fabricator $18 24 1B 68 - -
ALL OTHER CONCRETE PRODUCTS-Gunde - $18 24 1B 6S - - -
ALL OTHER CONCRETE PRODUCTS-Maintenance $18 77 1B 6S
ALL OTHER CONCRETE PRODUCTS-Operator $18 24 18 6S
ALL OTHER CONCRETE PRODUCTS-Welder $18 24 1B 6S
ALL OTHER CONCRETE PRODUCTS-Wet Pour $17 99 1B 6S
ALL OTHER CONCRETE PRODUCTS=Yard Patch — --- --- - - — $17 99 1 B 6S---
FENCE ERECTORS
FENCE ERECTOR $13 80 1
FENCE LABORER $11 60 11
FLAGGERS I - -
JOURNEY LEVEL $24 99 1M 5D
GLAZERS
JOURNEY LEVEL $35 21 2E 5G
HEAT&FROST INSULATORS AND ASBESTOS WORKERS
MECHANIC $3583 1F 5C
HEATING EQUIPMENT MECHANICS
MECHANIC ' $1845 11 5A
Page 2
See Benefit Code Key)— --
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
INDUSTRIAL ENGINE AND MACHINE MECHANICS
MECHANIC $15 65 1
INDUSTRIAL POWER VACUUM CLEANER
JOURNEY LEVEL $9 07 1
INLAND BOATMEN
ASSISTANT ENGINEER $30 68 1K 5D
CHIEF ENGINEER $3155 1K 5D
COOK $26 56 1K 5D
DECK ENGINEER,ABLE SEAMAN, OILER $26 56 1K 5D
DECKHAND $2615 1K 5D
FIRST MATE $30 78 1K 5D
MASTER \ $3372 1K 5D
MATE, LAUNCH OPERATOR $2881 1K 50
MESSMAN $2194 1K 5D
ORDINARY SEAMAN $23 26 1K 5D
INSPECTIOWCLEANINGISEALING OF SEWER&WATER SYSTEMS BY
REMOTE CONTROL
CLEANER OPERATOR, FOAMER OPERATOR $9 73 1
GROUT TRUCK OPERATOR $11 48 1
HEAD OPERATOR $12 78 1
TECHNICIAN - $6 72 __1 --
TV TRUCK OPERATOR $10 53 1
INSULATION APPLICATORS
JOURNEY LEVEL $34 34 1M 5D
IRONWORKERS
JOURNEY LEVEL $37 07 1 B 5A
LABORERS
ASPHALT RAKER $3015 1M 5D
BALLAST REGULATOR MACHINE $2967 1M 5D
BATCH WEIGHMAN $24 99 1M 5D
CARPENTER TENDER $2967 1M 5D
CASSION WORKER $30 51 1M 5D
CEMENT DUMPERIPAVING _ $3015 1M 5D
CEMENT FINISHER TENDER - - - $2967 - _ 1M 5D
CHIPPING GUN(OVER 30 LBS) $3015 11M _ 5D
CHIPPING GUN(UNDER 30 LBS)--- - -- --- - — - $2967 -- 1M - 50
CHUCK TENDER $2967 1M 5D
CLEAN-UP LABORER $2967 11M 50
CONCRETE FORM STRIPPER $2967 1M 5D
CONCRETE SAW OPERATOR - - --- - - - - - - $3015 - 1M __ __5D_
CRUSHER FEEDER $24 99 1M 5D
CURING LABORER $2967 1M 5D
DEMOLITION,WRECKING&MOVING(INCLUDING CHARRED MATERIALS) $2967 1M 5D
DITCH DIGGER - --- $2967 - 1M 5D
DIVER $30 51 1M 5D
DRILL OPERATOR(HYDRAULIC, DIAMOND) $3015 1M 5D
DRILL OPERATOR,AIRTRAC $30 51 1 M 5D
DUMPMAN $2967 1M 5D
FALLERIBUCKER, CHAIN SAW $3015 1M 5D
FINAL DETAIL CLEANUP(i e,dusting,vacuuming,vnndow cleaning,NOT $22 67 1 M 5D
construction debris cleanup)
FINE GRADERS $2967 1M SD
Page 3
-- - - - -- ---- - - - -- -- - --- - --(See Benefit Code Key)
OverPREVAILING Time Holiday Note
Classification WAGE Code Code Code
FIRE WATCH $2967 1M 5D
FORM SETTER $2967 1M 5D
GABION BAS<-T BUILDER $2967 iM 5D
GENERAL LABORER $2967 1M 5D
GRADE CHECKER&TRANSIT PERSON $3015 1M 5D
GRINDERS $2967 1M 50
GROUT MACHINE TENDER $2967 1M 50
HAZARDOUS WASTE WORKER LEVEL A $3051 1M 5D
HAZARDOUS WASTE WORKER LEVEL B $3015 1M 5D
HAZARDOUS WASTE WORKER LEVEL C $2967 1M 50
HIGH SCALER $3051 1M 5D
HOD CARRI ER/MORTARMAN $30 15 1M 5D
JACKHAMMER $3015 1M 5D
LASER BEAM OPERATOR $3015 1M 5D
MINER $3051 1M 50
NOZZLEPAN CONCRETE PUMP,GREEN CUTTER WHEN USING HIGH $3015 1M 5D
PRESSURE A1R&WATER ON CONCRETE&ROCK,SANDBLAST, GUN TE,
SHOTCRETE WATER BLASTER
PAVEMENT BREAKER $3015 11M 5D
PILOT CAR $24 99 1M 5D
PIPE RENER(NOT INSERT TYPE) $3015 1M 5D
PIPELAYER&CAULKER $3015 1M 50
PIPELAYER&CAULKER(LEAD) $3051 11M 5D
PIPEWRAPPER $3015 1M 5D
POT TENDER $2967 1M 5D
POWDER'?AN $3051 1M 5D
POWDERYAN HELPER $2967 1M 50
POWERJACKS $3015 1M 5D
RAILROAD SPIKE PULLER(POWER) $3015 1M 5D
RE-TIMBERMAN $3051 1M 5D
RIPRAPMAN $2967 1M 5D
SIGNALMAN $2967 1M 50
SLOPERSPRAYMAN $2967 1M 5D
SPREADER(C.ARY POWER OR SIMILAR TYPES) - _ $3015 _ 1M 5D
SPREADER(CONCRETE) $3015 1M 50
STAKE HCPPE.R -- _ - - - - --- -$2967- _ - 1M - 5D- - - -
STOCKPII--R $2967 1M 5D
TAMPER&SIMILAR ELECTRIC,AIR&GAS $3015 1M 5D
TAMPER R,1UL TIPLE&SELF PROPELLED) $3015 1M 50
TOOLROCAA MAN(AT JOB SITE) _ _ $29.67 __ 1M -- 5D
TOPPER-TAILER $2967 1M 5D
TRACK LABORER $2967 1M 5D
TRACK LINER(POWER) $3015 1M 50
TUGGER CPERATOR_ $3015 1M 50
VIBRATING SCREED(AIR,GAS,OR ELECTRIC) $2967 1M 5D
VIBRATOR $3015 1M 5D
WELDER $2967 _ 1M - 56
WELL-PO14TLABORER $3015 1M, 50
LABORERS-UNDERGROUND SEWER&WATER
GENERALLABORER $2967 1M 5D
PIPE LAYER $3015 1M 5D
Page 4
K�=covNN7_-Tam-
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
LANDSCAPE CONSTRUCTION
IRRIGATION OR LAWN SPRINKLER INSTALLERS $11 07 1
LANDSCAPE EQUIPMENT OPERATORS OR TRUCK DRIVERS $10 63 1
LANDSCAPING OR PLANTING LABORERS $8 42 1
LATHERS
JOURNEY LEVEL $34 94 1M 5D
MACHINISTS(HYDROELECTRIC SITE WORK)
MACHINIST $16 84 1
METAL FABRICATION (IN SHOP)
FITTER $15 86 1
LABORER $9 78 1
MACHINE OPERATOR $13 04 1
PAINTER $11 10 1
WELDER S15 46 1
MODULAR BUILDINGS
CABINET ASSEMBLY $11 56 1
ELECTRICIAN $11 56 1
EQUIPMENT MAINTENANCE $11 56
PLUMBER $11 56 1
PRODUCTION WORKER $9 26 1
TOOL MAINTENANCE $11 56 1 - -
UTILITY PERSON $11 56 1
WELDER $11 56 1
PAINTERS
JOURNEY LEVEL $27 63 2B 5A
PLASTERERS
JOURNEY LEVEL $35 63 1R 5A
PLAYGROUND&PARK EQUIPMENT INSTALLERS
JOURNEY LEVEL $8 42 1
PLUMBERS&PIPEFITTERS
JOURNEY LEVEL S43 71 1G 5A
POWER EQUIPMENT OPERATORS
ASSISTANT ENGINEERS $33 59 1T SD EL
BACKHOE, EXCAVATOR,SHOVEL (3 YD&UNDER) -- -- $36 05 1T 50 EL
BACKHOE, EXCAVATOR, SHOVEL (OVER 3 YD&UNDER 5 YD) __ $36 49 1T 50 EL
BACKHOE,EXCAVATOR,SHOVEL(6 YD AND OVER WITH.ATTACHMENTS) _ - $3699 -`- "- - 1T ---SD ---- EL ---
BACKHOES, (75 HP&UNDER) $35 69 1T 5D 81.
BACKHOES, (OVER 75 HP) $36 05 1T 5D EL
BARRIER MACHINE(ZIPPER) $36 05 1T 5D 8L
BATCH PLANT OPERATOR,CONCRETE-- - ------- - -- ---- - - $36 05 -- 1T 50— _ 8L _
BELT LOADERS(ELEVATING TYPE) $35 69 1T 5D 8L
BOBCAT $33 59 1T 5D 8L
BROOMS $33 59 1T 50 8L
BUMP CUTTER $36 05 - - IT 5D 8L _
CABLEWAYS $3649 1T 50 &L
CHIPPER _ $36 05 - 1T 50 8L
COMPRESSORS $33 59 _ 1T 5D 8L
CONCRETE FINISH MACHINE-LASER SCREED $33 59 1T 5D 8L CONCRETE PUMPS $3569 1T 50 8L
CONCRETE PUMP-TRUCK MOUNT WITH BOOM ATTACHMENT $36 05 1T 5D 8L
CONVEYORS $35.69 1T 50 8L
CRANES, THRU 19 TONS,WITH ATTACHMENTS $35 69 1T 5D 8L
Page 5
- = FCING__C_atJNTI!
- - - -��`- -`ram`--- _----_ - --
--_ - - -- --. ---- —---- a -----
---- - -- See BeneR Cdde Key) --
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
CRANES, 20-44 TONS,WITH ATTACHMENTS $36 05 1T 5D 8L
CRANES, 45 TONS-99 TONS, UNDER 150 FT OF BOOM(INCLUDING JIB $36 49 1T 5D 8L
WITH ATACHMENTS)
CRANES, 100 TONS-199 TONS,OR 150 FT OF BOOM(INCLUDING JIB $36 99 1T 5D 8L
WITH ATTACHMENTS)
CRANES,200 TONS TO 300 TONS,OR 250 FT OF BOOM(INCLUDING JIB $37 49 1T SD 8L
WITH ATTACHMENTS)
CRANES,A-FRAME, 10 TON AND UNDER $3359 1T 5D 8L
CRANES,A-FRAME,OVER 10 TON $35 69 1T 5D 8L
CRANES, OVER 300 TONS,OR 300'OF BOOM INCLUDING JIB WITH $37 99 1T 5D 8L
ATTACHMENTS
CRANES,OVERHEAD,BRIDGE TYPE(20-44 TONS) $36 05 1T 5D 8L
CRANES,OVERHEAD, BRIDGE TYPE(45-99 TONS) $36 49 1T 5D 8L
CRANES,OVERHEAD, BRIDGE TYPE(100 TONS&OVER) $36 99 1T 5D 8L
CRANES,TOWER CRANE UP TO 175'IN HEIGHT,BASE TO BOOM $36 99 1T 5D 8L
CRANES,TOWER CRANE OVER 175'IN HEIGHT, BASE TO BOOM $37 49 1T 5D 8L
CRUSHERS $36 05 1T 5D 8L
DECK ENGINEERIDECK WINCHES(POWER) $36 05 1T 5D 8L
DERRICK, BUILDING $3649 1T 5D 8L
DOZERS, D-9&UNDER $35 69 1T 5D 8L
DRILL OILERS-AUGER TYPE,TRUCK OR CRANE MOUNT $35 69 1T 5D 8L
DRILLING MACHINE $36 05 1T 5D 8L
ELEVATOR AND MANLIFT, PERMANENT AND SHAFT-TYPE $3359 1T 5D 8L
EQUIPMENT SERVICE ENGINEER(OILER) $35 69 IT 5D 8L
FINISHING MACHINEIBIDWELL GAMACO AND SIMILAR EQUIP $36 05 1T 5D 8L
FORK LIFTS, (3000 LBS AND OVER) $35 69 1T 5D 8L
FORK LIFTS, (UNDER 3000 LBS) $3359 1T 5D 8L
GRADE ENGINEER $3569 1T 5D 8L
GRADECHECKER AND STAKEMAN $3359 1T 5D 8L
HOISTS,OUTSIDE(ELEVATORS AND MANLIFTS),AIR TUGGERS $35 69 1T 5D 8L
HORIZONTAL/DIRECTIONAL DRILL LOCATOR $35 69 1T 5D BL
HORIZONTAL/DIRECTIONAL DRILL OPERATOR $36 05 1T 5D 8L
HYDRALIFTS/BOOM TRUCKS(10 TON&UNDER) $3359 1T 5D SL
HYDRALIFTS/BOOM TRUCKS(OVER 10 TON) $35 69 1T 5D 8L
LOADERS,OVERHEAD(6 YD UP TO 8 YD) - $36 49 1T 5D 8L
LOADERS,OVERHEAD(8 YD&OVER) $36 99 1T 50 8L
LOADERS,OVERHEAD(UNDER 6 YD), PLANT FEED - ---- -- -- $36 05- -- -1T 5D BL -
LOCOMOTIVES,ALL $36.05 1T 5D 8L
MECHANICS,ALL $36 05 1T 5D 8L
MIXERS,ASPHALT PLANT $36,05 1T 5D 8L
MOTOR PATROL GRADER(FINISHING) $36 05 1T 5D 8L
MOTOR PATROL GRADER(NON-FINISHING) $35,69 1T 5D 8L
MUCKING MACHINE, MOLE,TUNNEL DRILL AND/OR SHIELD $36 49 1T 50 8L
OIL DISTRIBUTORS, BLOWER DISTRIBUTION AND MULCH SEEDING $33.59 1T 5D 8L
OPERATOR
PAVEMENT BREAKER $3359 1T 5D 8L
PILEDRIVER(OTHER THAN CRANE MOUNT) $36 05 1T 5D 8L
PLANT OILER(ASPHALT CRUSHER) $35 69 1T 5D 81.
POSTHOLE DIGGER,MECHANICAL $3359 1T 50 8L
POWER PLANT $3359 1T 5D 8L
PUMPS,WATER $3359 1T 5D SL
QUAD 9, D-10,AND HD-41 $36 49 1T 5D 8L
REMOTE CONTROL OPERATOR ON RUBBER TIRED EARTH MOVING $36 49 1T 50 8L
EQUIP
Page 6
_31
*---------
- - - - - --- --- ------- -_- - -- - (See Benefit Code Key)_Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
RIGGER AND BELLMAN $33 59 1T 5D 8L
ROLLAGON S36 49 1T 5D 8L
ROLLER, OTHER THAN PLANT ROAD MIX $33 59 1T 5D 8L
ROLLERS,PLANTMIX OR MULTILIFT MATERIALS $35 69 1T 5D 8L
ROTO-MILL,ROTO-GRINDER $36 05 1T 50 81.
SAWS,CONCRETE $35 69 1T 50 8L
SCRAPERS-SELF PROPELLED,HARD TAIL END DUMP,ARTICULATING $36 b 1T 5D 8L
OFF-ROAD EQUIPMENT(UNDER 45 YD) _
SCRAPERS-SELF PROPELLED,HARD TAIL END DUMP,ARTICULATING $36 49 1T 5D 8L
OFF-ROAD EQUIPMENT(45 YD AND OVER)
SCRAPERS,CONCRETE AND CARRY ALL $35 69 1T 5D 8L
SCREED MAN $36 05 1T 5D 8L
SHOTCRETE GUNITE S33 59 1T 5D 8L
SLIPFORM PAVERS S36 49 1T 5D 8L
SPREADER,TOPSIDE OPERATOR-BLAW KNOK $36 05 1T 5D 81.
SUBGRADE TRIMMER S36 05 1T 5D 8L
TRACTORS,(75 HP&UNDER) S35 69 1T 5D 8L
TRACTORS, (OVER 75 HP) $36 0:5 1T 5D 8L
TRANSFER MATERIAL SERVICE MACHINE $36 C6 1T 5D 8L
TRANSPORTERS,ALL TRACK OR TRUCK TYPE $36 49 1T 5D 8L
TRENCHING MACHINES $35 69 1T 5D 81.
TRUCK CRANE OILERIDRIVER(UNDER 100 TON) $35 69 1T 5D 8L
TRUCK CRANE OILER/DRIVER(100 TON&OVER) $36 05 1T 5D 8L
WHEEL TRACTORS, FARMALL TYPE 53359 1T 5D 8L
YO YO PAY DOZER S36 C5 1T 5D 8L
POWER EQUIPMENT OPERATORS-UNDERGROUND SEWER&WATER
(SEE POWER EQUIPMENT OPERATORS)
POWER LINE CLEARANCE TREE TRIMMERS
JOURNEY LEVEL IN CHARGE S28 90 4A 5A
SPRAY PERSON S27 34 4A 5A
TREE EQUIPMENT OPERATOR S27 72 4A 5A
TREE TRIMMER S25 64 4A 5A
TREE TRIMMER GROUNDPERSON $18 70 4A 5A
REFRIGERATION&AIR CONDITIONING MECHANICS
MECHANIC S4186 1G 5A
- - RESIDENTIAL BRICK&MARBLE MASONS--- -- -- ---- - - - - _ _
JOURNEY LEVEL S19 25 1
RESIDENTIAL CARPENTERS
JOURNEY LEVEL S25 78 1 B 5D
RESIDENTIAL CEMENT MASONS
JOURNEY LEVEL - - S35 33 1M 5D -
RESIDEN71AL DRYWALL TAPERS
JOURNEY LEVEL $22 18 1
RESIDENTIAL ELECTRICIANS
JOURNEY LEVEL S2624 1
RESIDENTIAL GLAZIERS
JOURNEY LEVEL - - - S24-34 2E 5G
RESIDENTIAL INSULATION APPLICATORS
JOURNEY LEVEL $17 59 1
RESIDENTIAL LABORERS — -
JOURNEY LEVEL S7-96 1
Page 7
COUNTY
(See Benefd Code Key)
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
RESIDENTIAL PAINTERS
JOURNEY LEVEL $14 83 1
RESIDENTIAL PLUMBERS&PIPEFITTERS
JOURNEY LEVEL $27.67 1G 5A
RESIDENTIAL REFRIGERATION&AIR CONDITIONING MECHANICS
JOURNEY LEVEL $41 86 1G 5A
RESIDENTIAL SHEET METAL WORKERS
JOURNEY LEVEL(FIELD OR SHOP) $26 23 - 1J 5A
RESIDENTIAL SOFT FLOOR LAYERS
JOURNEY LEVEL $3060 113 5A
RESIDENTIAL SPRINKLER FITTERS(FIRE PROTECTION)
JOURNEY LEVEL $15 37 1
ROOFERS
JOURNEY LEVEL $3103 1R 5A
USING IRRITABLE BITUMINOUS MATERIALS $34 03 1R 5A
SHEET METALWORKERS
JOURNEY LEVEL(FIELD OR SHOP) $39 68 11 6L
SIGN MAKERS&INSTALLERS(ELECTRICAL)
SIGN INSTALLER $23 36 1
SIGN MAKER $16 84 1
SIGN MAKERS&INSTALLERS(NON-ELECTRICAL)
SIGN INSTALLER $17 31 1
SIGN MAKER $15 61 1
SOFT FLOOR LAYERS
JOURNEY LEVEL $30 60 1B 5A
SOLAR CONTROLS FOR WINDOWS
JOURNEY LEVEL $12 44 1 5S
SPRINKLER FITTERS(FIRE PROTECTION)
JOURNEY LEVEL $42 43 1B 5C
STAGE RIGGING MECHANICS(NON STRUCTURAL)
JOURNEY LEVEL $13 23 1
SURVEYORS
CHAIN PERSON $9 35 1
INSTRUMENT PERSON - $11 40 1
PARTY CHIEF $13 40 1
TELEPHONE LINE CONSTRUCTION-OUTSIDE
CABLE SPLICER $24 74 2B 5A
HOLE DIGGERIGROUND PERSON $13 18 2B 5A
INSTALLER(REPAIRER) $23 66 26 5A
JOURNEY LEVEL TELEPHONE LINEPERSON -- $22 91 - 2B 5A _ -- -
SPECIAL APPARATUS INSTALLER 1 $24 74 2B 5A
SPECIAL APPARATUS INSTALLER II $24 21 2B 5A
TELEPHONE EQUIPMENT OPERATOR(HEAVY) $24 74 2B 5A
TELEPHONE EQUIPMENT OPERATOR(LIGHT) $22 91 26 5A
TELEVISION GROUND PERSON $12 42 26 5A
TELEVISION LINEPERSOMINSTALLER $17 02 2B 5A
TELEVISION SYSTEM TECHNICIAN $20 54 - 2B SA
TELEVISION TECHNICIAN $18 33 2B 5A
TREE TRIMMER $22.91 2B 5A
TERRAZZO WORKERS&TILE SETTERS
JOURNEY LEVEL $32 83 1H 5A
Page 8
- -
(See Benefit Code Key)
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
TILE,MARBLE&TERRAZZO FINISHERS
FINISHER $2666 1H 5A
TRAFFIC CONTROL STRIPERS
JOURNEY LEVEL $27 67 1 K 5A
TRUCK DRIVERS
ASPHALT MIX(TO 16 YARDS) $33 48 1T 5D 81.
ASPHALT MIX(OVER 16 YARDS) $34 06 1T 5D 81-
DUMPTRUCK $3348 1T 5D 81.
DUMP TRUCK&TRAILER $34 06 1T 5D 81.
OTHERTRUCKS $3406 1T 5D 8L
TRANSIT MIXER $23 45 1
WELL DRILLERS&IRRIGATION PUMP INSTALLERS\
IRRIGATION PUMP INSTALLER $17 71 1
OILER $12 97 1
WELL DRILLER $17 68 1
Page 9
YE
- EFFECTIVE 0831-01
- •_aw:wxwwexwfw±wwwww++� _ _ - - - — _ _-
Over
PREVAILING Time Holiday Note
Classification WAGE Code Code Code
Counties Covered
JEFFERSON, KITSAP, LEWIS, MASON AND PACIFIC
JANITOR $8 47 1
SHAMPOOER $8 97 1
WAXER $8 97
WINDOWCLEANER $1322
Counties Covered
KING
JANITOR $13 45 2F 5S
TRAVELING WAXERISHAMPOOER $13 95 2F 5S
WINDOW CLEANER(NON-SCAFFOLD) $17 54 2F 5S
WINDOW CLEANER(SCAFFOLD) $18 53 2F 5S
Counties Covered
KLICKITAT AND SKAGIT
JANITOR $10 00 t
SHAMPOOER $6 72 1
WAXER $6 72
WINDOW CLEANER $6 72 1
Counties Covered
OKANOGAN
JANITOR $7 24
SHAMPOOER $10 00 1
WAXER $814 t
WINDOW CLEANER $9 14
Counties Covered
PEND OREILLE
JANITOR $6 72
SHAMPOOER $8 50
WAXER - - $6 72
WINDOW CLEANER $9 00 t
Counties Covered
PIERCE
JANITOR $9 37
SHAMPOOER $10 08 1
WAXER $10 08
WINDOW CLEANER $13 22
Counties Covered
SNOHOMISH
JANITOR $8 73
SHAMPOOER $9 23
WAXER $9 23
WINDOW CLEANER $1348 t
Page 3
BE_NEFI I cabE mY--EFF_ECTIEVE 0"- IFF -
# ! itt}tt};tt}tN}Flif YtitY#}tittt!}tiititi}iH###Y###i##f�!lR�kt}kititk#Yttitf#}tat}}:zitt:za�sYftk##t}ttkif tT}T#rt}#k#iit — —' -
__
OVERTIME CALCULATIONS ARE BASED ONTHE HOURLY RATE ACTUALLY PAID TO THE WORKER ON PUBLIC
WORKS PROJECTS,THE HOURLY RATE MUST BE NOT LESS THAN THE PREVAILING RATE OF WAGE MINUS THE
HOURLY RATE OF THE COST OF FRINGE BENEFITS ACTUALLY PROVIDED FOR THE«ORKER.
1 ALL HOURS WORKED IN EXCESS OF EIGHT(8)HOURS PER DAY OR FORTY(40) HOURS PER WEEK SHALL BE PAID AT ONE
AND ONE-HALF TIMES THE HOURLY RATE OF WAGE
A ALL HOURS WORKED ON SATURDAYS, SUNDAYS AND HOLIDAYS SHALL ALSO BE PAID AT ONE AND ONE-HALF
TIMES THE HOURLY RATE OF WAGE
B ALL HOURS WORKED ON SATURDAYS SHALL BE PAID AT ONE AND ONE-HALF TMES THE HOURLY RATE OF WAGE
ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
C ALL HOURS WORKED ON SUNDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
D THE FIRST EIGHT (8) HOURS ON SATURDAYS OF A FIVE - EIGHT HOUR WORK WEEK AND THE FIRST EIGHT (8)
HOURS WORKED ON A FIFTH CALENDAR DAY,EXCLUDING SUNDAI,IN A FOUR-TEN HOUR SCHEDULE,SHALL BE
PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAGE ALL HOURS WORKED IN EXCESS OF EIGHT(8)
HOURS PER DAY ON SATURDAY, ALL HOURS WORKED IN EXCESS OF EIGHT (8) HOURS IN A FIFTH CALENDAR
WEEKDAY OF A FOUR - TEN HOUR SCHEDULE, ALL HOURS WORKED IN EXCESS OF TEN (10) HOURS PER DAY
MONDAY THROUGH FRIDAY,AND ALL HOURS WORKED ON SUNDAYS --ND HOLIDAYS SHALL BE PAID AT DOUBLE
THE HOURLY RATE OF WAGE
F THE FIRST EIGHT(8)HOURS ON SATURDAY SHALL BE PAID AT ONE.AND ONE-HALF TIMES THE HOURLY RATE OF
WAGE ALL HOURS WORKED IN EXCESS OF EIGHT (8) HOURS ON SATURDAY, AND ALL HOURS WORKED ON
SUNDAYS AND HOLIDAYS (EXCEPT LABOR DAY) SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE ALL
HOURS WORKED ON LABOR DAY SHALL BE PAID AT THREE TIMES THE HOURL' RATE OF WAGE
G THE FIRST TEN (10) HOURS WORKED ON SATURDAYS AND THE FIRST TEN (10) HOURS WORKED ON A FIFTH
CALENDAR WEEKDAY IN A FOUR - TEN HOUR SCHEDULE, SHALL BE PAID AT ONE AND ONE-HALF TIMES THE
HOURLY RATE OF WAGE ALL HOURS WORKED IN EXCESS OF TEN 110) HOURS PER DAY MONDAY THROUGH
SATURDAY, AND ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY
RATE OF WAGE
H ALL HOURS WORKED ON SATURDAYS (EXCEPT MAKEUP DAYS IF 'AORK IS LOST DUE TO INCLEMENT WEATHER
CONDITIONS OR EQUIPMENT BREAKDOWN) SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF
WAGE ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS SHALL BE PAD AT DOUBLE THE HOURLY RATE OF
WAGE
I THE FIRST EIGHT(8)HOURS ON SATURDAY SHALL BE PAID AT ONE ANT) ONE-HALF TIMES THE HOURLY RATE OF
WAGE ALL HOURS WORKED IN EXCESS OF EIGHT (8) HOURS 0`4 SATURDAY, AND ALL HOURS WORKED ON
SUNDAYS AND HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATE OF R AGE
K ALL HOURS WORKED ON SATURDAYS AND SUNDAYS SHALL BE PAID AT ONE AN-D ONE-HALF TIMES THE HOURLY
RATE OF WAGE ALL HOURS WORKED ON HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
L ALL HOURS WORKED ON SATURDAYS, SUNDAYS AND HOLIDAYS (EXCEPT THANKSGIVING DAY AND CHRISTMAS
DAY) SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAGE. ALL HOURS WORKED ON
THANKSGIVING DAY AND CHRISTMAS DAY SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
M ALL HOURS WORKED ON SATURDAYS (EXCEPT MAKEUP DAYS IF WORIC IS LOST DUE TO INCLEMENT WEATHEF
CONDITIONS) SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAGE ALL HOURS WORKEI
ON SUNDAYS AND HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
N ALL HOURS WORKED ON SATURDAYS(EXCEPT MAKEUP DAYS)SHALL BE PAID AT ONE AND ONE-HALF TIMES THI
HOURLY RATE OF WAGE ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS SHALL BE PAID AT DOUBLE TH
HOURLY RATE OF WAGE
P ALL HOURS WORKED ON SATURDAYS(EXCEPT MAKEUP DAYS)AND SL?IDA7 S SHALL BE PAID AT ONE AND ONE
HALF TIMES THE HOURLY RATE OF WAGE ALL HOURS WORKED ON HOLIDAYS SHALL BE PAID AT DOUBLE TH
HOURLY RATE OF WAGE
Q ALL HOURS WORKED ON S ATURDAYS SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAG]
ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS (EXCEPT CHRISTMAS DAY) SHALL BE PAID AT DOUBLE TH
HOURLY RATE OF WAGE ALL HOURS WORKED ON CHRISTMAS DAY SHALL BE PAID AT TWO AND ONE-HAI
TIMES THE HOURLY RATE OF WAGE
R ALL HOURS WORKED ON SU-NDAYS AND HOLIDAYS SHALL BE PAID AT TWO M ES THE HOURLY RATE OF WAGE
BENEFIT CODE KEY-EFFECTIVE 08-31-01
1 S ALL HOURS WORKED ON SUNDAYS BETWEEN THE HOURS OF 12 OOAM SUNDAY AND 6 OOAM MONDAY AND 0\
HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
T ALL HOURS WORKED ON SATURDAYS,EXCEPT MAKE-UP DAYS,SHALL BE PAID AT ONE AND ONE-HALF TIMES TIE
HOURLY RATE OF WAGE ALL HOURS WORKED AFTER 6 OOPM SATURDAY TO 6'OOAM MONDAY AND ON HOLIDAY S
SHALL BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
U ALL HOURS W ORKED ON SATURDAYS SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAGE
ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS (EXCEPT LABOR DAY) SHALL BE PAID AT TWO TIMES THE
HOURLY RATE OF WAGE ALL HOURS WORKED ON LABOR DAY SHALL BE PAID AT THREE TIMES THE HOURLY
RATE OF WAGE
W ALL HOURS WORKED ON SATURDAYS AND SUNDAYS(EXCEPT MAKE-UP DAYS)SHALL BE PAID AT ONE AND ONE
HALF TIMES THE HOURLY RATE OF WAGE ALL HOURS WORKED ON HOLIDAYS SHALL BE PAID AT TWO TAMES
THE HOURLY RATE OF WAGE
2 ALL HOURS WORKED IN EXCESS OF EIGHT (8)HOURS PER DAY OR FORTY (40)HOURS PER WEEK SHALL BE PAID AT ONE
AND ONE-HALF TIMES THE HOURLY RATE OF WAGE
A THE FIRST SIX (6) HOURS ON SATURDAY SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF
WAGE ALL HOURS WORKED IN EXCESS OF SIX(6)HOURS ON SATURDAY AND ALL HOURS WORKED ON SUNDAI S
AND HOLIDAYS SHALL BE PAID AT TWO TIMES THE HOURLY RATE OF WAGE
B ALL HOURS WORKED ON HOLIDAYS SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAGE
C ALL HOURS WORKED ON SUNDAYS SHALL BE PAID AT ONE AND ONE-HALF TAMES THE HOURLY RATE OF WAGE
ALL HOURS WORKED ON HOLIDAYS SHALL BE PAID AT TWO TIMES THE HOURLY RATE OF WAGE
D ALL HOURS WORKED ON SATURDAYS AND SUNDAYS SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLI
RATE OF WAGE THE FIRST EIGHT (8) HOURS WORKED ON HOLIDAYS SHALL BE PAID AT STRAIGHT TIME L\
ADDITION TO THE HOLIDAY PAY ALL HOURS WORKED IN EXCESS OF EIGHT(8)HOURS ON HOLIDAYS SHALL BF
PAID AT ONE AND ONE-HALF TIMES THE HOURLY RATE OF WAGE
E ALL HOURS WORKED ON SATURDAYS OR HOLIDAYS(EXCEPT LABOR DAY)SHALL BE PAID AT ONE AND ONE-HALE
TIMES THE HOURLY RATE OF WAGE ALL HOURS WORKED ON SUNDAYS OR ON LABOR DAY SHALL BE PAID Al
TWO TIMES THE HOURLY RATE OF WAGE
F THE FIRST EIGHT(8)HOURS WORKED ON HOLIDAYS SHALL BE PAID AT THE STRAIGHT HOURLY RATE OF WAGE D
ADDITION TO THE HOLIDAY PAY ALL HOURS WORKED IN EXCESS OF EIGHT(8)HOURS ON HOLIDAYS SHALL BF
PAID AT DOUBLE THE HOURLY RATE OF WAGE
G ALL HOURS WORKED ON SUNDAY SHALL BE PAID AT TWO TIMES THE HOURLY RATE OF WAGE ALL HOUR
WORKED ON PAID HOLIDAYS SHALL BE PAID AT TWO AND ONE-HALF TIMES THE HOURLY RATE OF WAGI
INCLUDING HOLIDAY PAY
J ALL HOURS WORKED ON SUNDAYS SHALL BE PAID AT TWO TAMES THE HOURLY RATE OF WAGE ALL HOL-R
WORKED ON PAID HOLIDAYS SHALL BE PAID AT TWO AND ONE-HALF TAMES THE HOURLY RATE OF WAGE
INCLUDING THE HOLIDAY PAY ALL HOURS WORKED ON UNPAID HOLIDAYS SHALL BE PAID AT TWO TABS TIL
HOURLY RATE OF WAGE
M ALL HOURS WORKED ON SATURDAYS,SUNDAYS AND HOLIDAYS SHALL BE PAID AT DOUBLE THE HOURLY RATI
OF WAGE
0 ALL HOURS WORKED ON SUNDAYS AND HOLIDAYS SHALL BE PAID AT ONE AND ONE-HALF TIMES THE HOURLl
RATE OF WAGE
4 A ALL HOURS WORKED IN EXCESS OF EIGHT(8)HOURS PER DAY OR FORTY(40)HOURS PER WEEK SHALL BE PAID A
DOUBLE THE HOURLY RATE OF WAGE ALL HOURS WORKED ON SATURDAYS, SUNDAYS AND HOLIDAYS SHALL
BE PAID AT DOUBLE THE HOURLY RATE OF WAGE
HOLIDAY CODES
5 A HOLIDAYS NEW YEAR'S DAY,MEMORIAL DAY,INDEPENDENCE DAY,LABOR DAY,THANKSGIVING DAY,FRIDA'
AFTER THANKSGIVING DAY,AND CHRISTMAS DAY(7)
B HOLIDAYS NEW YEAR'S DAY,MEMORIAL DAY, INDEPENDENCE DAY,LABOR DAY,THANKSGIVING DAY,FRIDA
AFTER THANKSGIVING DAY,THE DAY BEFORE CHRISTMAS,AND CHRISTMAS DAY(8)
5 C HOLIDAYS NEW YEARS DAY, WASHINGTOMS BIRTHDAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY,
THANKSGIVING D AY,TPE FRIDAY AFTER THANKSGIVING DAY,AND CHRISTMAS DAY(9)
D HOLIDAYS NEW YEARS DAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, THE
FRIDAY AND SATURDAY AFTER THANKSGIVING DAY,AND CHRISTMAS DAY(8)-
G HOLIDAYS NE'N YEARS DAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, THE
LAST WORK DAY BEFORE CHRISTMAS DAY,AND CHRISTMAS DAY(7)
H HOLIDAYS \EW YEARS DAY, MEMORIAL DAY, INDEPENDENCE DAY, THA-\-KSGIVING DAY, THE DAY AFTER
THANKSGIVING DAY,AND CHRISTMAS(6)
I HOLIDAYS NEW YEARS DAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, AND
CHRISTMAS DAY (61
N HOLIDAYS NEW YEARS DAY, WASHINGTON'S BIRTHDAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY,
VETERAN'S'DAY,TFLANhSGI�TNG DAY,THE FRIDAY AFTER THANKSGIVING DAY-.AND CHRISTN AS DAY(9)
0 PAID HOLIDAYS NEW YEAR'S DAY, WASHINGTON'S BIRTHDAY, INDEPENDENCE DAY, LABOR DAY,
THANKSGIVING DAY AND CHRISTMAS DAY(6)
Q PAID HOLIDAYS NEW YEAR'S DAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY,
AND CHRISTMAS D AY(6�
R PAID HOLIDAYS NEW YEAR'S DAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY,
DAY AFTER THANKSGR_,G DAY,ONE-HALF DAY BEFORE CHRISTMAS DAY,A D CHRISTMAS DAY (7 1/2)
S PAID HOLIDAYS NEV YEAR'S DAY, PRESIDENTS DAY, MEMORIAL DAY, L\-DEPENDENCE DAY, LABOR DAY,
THANKSGIVING DAY, A"-D CHRISTMAS DAY(7)
T PAID HOLIDAYS SEVEN(7)PAID HOLIDAYS
U PAID HOLIDAYS NEW YEAR'S DAY, WASHINGTON'S BIRTHDAY, INDEPENDENCE DAY, LABOR DAY,
THANKSGIVING DAY,CHRISTMAS DAY,AND A DAY OF THE EMPLOYEES CHOICE (7)
V PAID HOLIDAYS SL\(6)FAID HOLIDAYS
W PAID HOLIDAN S N`\E(S)PAID HOLIDAYS
X HOLIDAYS AFTER 520 FOURS-NEW YEAR'S DAY,THANKSGIVING DAY AND CE_7RIST:SLAS DAY AFTER 2080 HOURS
- NEW YEARS DAY 14ASHINGTON'S BIRTHDAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY,
THANKSGIVING DAY CFRISTtitAS DAY AND A FLOATING HOLIDAY(8)
Y HOLIDAYS NDW Y^.AR S DAY, MEMORIAL DAY,INDEPENDENCE DAY,LABOR D AY,PRESIDENTIAL ELECTION DAY,
THAN KSGIVL\G DAY,TF!FRIDAY FOLLOWING THANKSGIVING DAY,AND CHRISTMAS DAY(8)
Z HOLIDAYS YEW YEAR'S DAY, MEMORIAL. DAY, INDEPENDENCE DAY. LABOR DAY, VETERANS DAY,
THANKSGIVING D AY,THE FRIDAY AFTER THANKSGIVING DAY,AND CMUSTNLAS DAY(8),
6 A PAID HOLIDAYS \-EW YEAR'S DAY, WASHINGTON'S BIRTHDAY, MEMORLAL DAY, INDEPENDENCE DAY, LABOR
DAY,THANKSGIVING D AY,THE FRIDAY AFTER THANKSGIVING DAY,AND CHR STMAS DAY(8)
C HOLIDAYS NEW YEAR'S DAY, WASHINGTON'S BIRTHDAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY,
THANKSGIVING DAY,TFC DAY AFTER THANKSGIVING DAY,THE LAST WORK DAY BEFORE CHRISTMAS DAY,AND
CHRISTMAS DAY(9)
D PAID HOLIDAYS N-EW YEAR'S DAY, WASHLNGTONPS BIRTHDAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR
DAY, THANKSGIVING DAY,THE FRIDAY AFTER THANKSGIVING DAY, CHRISTMAS DAY,THE DAY BEFORE OR THE
DAY AFTER CHRIST MAS DAY(9)
H HOLIDAYS NEW YEAR'S DAY,MARTIN LUTHER KING]R DAY,MEMORIAL DAY-INDEPENDENCE DAY,LABOR DAY,
THANKSGIVING DAY,THE FRIDAY AFTER THANKSGIVING DAY,AND CHRISTMAS DAY(8)
I PAID HOLIDAY S. NEW YEAR'S DAY,MEMORIAL DAY,INDEPENDENCE DAY,LABOR DAY,THANKSGIVING
DAY,FRIDAY AFTER THLANKSGIVING DAY,AND CHRISTMAS DAY(7)
6 L HOLIDAYS NEW YEARS DAY,MEMORIAL DAY,INDEPENDENCE DAY,LABOR DAY,THANKSGIVING DAY,
THE FRIDAY AFTER T==ANKSGIVING DAY, THE LAST WORKING DAY BEFORE CHRISTMAS DAY, AND
CHRISTMAS DAY (8)
BENEFIT CODE IMX_ EF_F19ETFVE 08-31A1
Q PAID HOLIDAYS NEW YEAR'S DAY,N EMORIAL DAY,INDEPENDENCE DAY,LABOR DAY,THANKSGIVING
DAY THE DAY AFTER THANKSGIVING DAY AND CHRISTMAS DAY UNPAID HOLIDAY PRESIDENTS'DAY
S PAID HOLIDAYS NEW YEAR'S DAY,MEMORIAL DAY,INDEPENDENCE DAY,LABOR DAY,THANKSGIVING
DAY.THE FRIDAY AFTER THANKSGIVING DAY,CHRISTMAS EVE DAY,AND CHRISTMAS DAY(8)
T PAID HOLIDAYS NEW YEAR'S DAY, WASHINGTON'S BIRTHDAY, MEMORIAL DAY, INDEPENDENCE DAY,
LABOR DAY, THANKSGIVING DAY, THE FRIDAY AFTER THANKSGIVING DAY,THE LAST WORKING DAY
BEFORE CHRISTMAS DAY,AND CHRISTMAS DAY(9)
U HOLIDAYS NEW YEAR'S DAY, DAY BEFORE NEW YEAR'S DAY, MEMORIAL DAY, DAY BEFORE
INDEPENDENCE DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, THE FRIDAY AFTER
THA\�SGl VING DAY,THE DAY BEFORE CHRISTMAS DAY,CHRISTMAS DAY(10)
V PAID HOLIDAYS NEW YEAR'S DAY, MEMORIAL DAY, INDEPENDENCE DAY,LABOR DAY,THANKSGIVING
DAY.DAY AFTER THANKSGIVING DAY,CHRISTMAS EVE DAY,CHRISTMAS DAY, EMPLOYEE'S BIRTHDAY,
AND ONE DAY OF THE EMPLOYEE'S CHOICE(10)
W PAID HOLIDAYS NEW YEAR'S DAY,DAY BEFORE NEW YEAR'S DAY,PRESIDENTS DAY,MEMORIAL DAY,
INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, DAY AFTER THANKSGIVING DAY, CHRISTMAS
DAY, DAY BEFORE CHRISTMAS DAY(10)
X PAID HOLIDAYS NEW YEAR'S DAY, DAY BEFORE OR AFTER NEW YEAR'S DAY, PRESIDENTS DAY,
MENIORLAI- DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, DAY AFTER THANKSGIVING
DAY CHRISTMAS DAY,DAY BEFORE OR AFTER CHRISTMAS DAY,EMPLOYEE'S BIRTHDAY(11)
VOTE CODES
8 A T,iE 5TA.\DBY RATE OF PAY FOR DIVERS SHALL BE ONE-HALF TTMES THE DIVERS RATE OF PAY IN ADDITION TO
TIE HOURLY WAGE AND FRINGE BENEFITS,THE FOLLOWING DEPTH PREMIUMS APPLY TO DEPTHS OF FIFTY FEET
OR MORE
OVER 50'TO 100'-$I 00 PER FOOT FOR EACH FOOT OVER 50 FEET
OVER 100'TO 175'-$2 25 PER FOOT FOR EACH FOOT OVER 100 FEET
OVER 175'TO 250'-S5 50 PER FOOT FOR EACH FOOT OVER 175 FEET
OVER 250'-DIVERS MAY NAME THEIR OWN PRICE,PROVIDED IT IS NO LESS THAN THE SCALE LISTED
FOR 250 FEET
C T-IE STANDBY RATE OF PAY FOR DIVERS SHALL BE ONE-HALF TRVIES THE DIVERS RATE OF PAY IN ADDITION TO
T',EE HOURLY WAGE AND FRINGE BENEFITS,THE FOLLOWING DEPTH PREMIUMS APPLY TO DEPTHS OF FIFTY FEET
OR MORE
OVER 50'TO 100'-$I 00 PER FOOT FOR EACH FOOT OVER 50 FEET
OVER 100'TO 150'-$1 50 PER FOOT FOR EACH FOOT OVER 100 FEET
OVER 150'TO 200'-S2 00 PER FOOT FOR EACH FOOT OVER 150 FEET
OVER 200'-DIVERS MAY NAME THEIR OWN PRICE
D V ORKHRS P,ORKING WITH SUPPLIED AIR ON HAZMAT PROJECTS RECEIVE AN ADDITIONAL Sl 00 PER HOUR
L V ORKHRS ON HAZMAT PROJECTS RECEIVE ADDITIONAL HOURLY PREMIUMS AS FOLLOWS-LEVEL A $0 75, LEVEL
B SO-50, AND LEVEL C $0 25
M RORti.ERS ON HAZMAT PROJECTS RECEIVE ADDITIONAL HOURLY PREMIUMS AS FOLLOWS,LEVELS A&B S100,
LEVELS C&D $0 50
N F MKERS ON HAZMAT PROJECTS RECEIVE ADDITIONAL HOURLY PREMIUMS AS FOLLOWS-LEVEL A $1 00,LEVEL
B $0 75,LEVEL C $0 50, AND LEVEL D $0 25